All of our resins are solvent free, non-toxic, easy to use and versatile; they are also produced in an environmentally sensitive manner.

The range includes:

ES 8102          Our standard Doming Resin. This is a clear liquid resin and our best seller. It domes well due to its higher viscosity. It can be used to enamel over patterned, printed, glass, metal and all types of surfaces. Can be coloured with the Opaque and Fluorescent Colour Pastes.

ES 8103          A low viscosity resin and ideal for use on areas in excess of 5cm squared. It can also be used to blend with the Thixotropic Resin to reduce its viscosity and with the Transparent Coloured Resins to reduce the depth of colour. Can be coloured with the Opaque and Fluorescent Colour Pastes.

ES 8119          Our popular Eco Resin. A speciality resin for those sensitive to environmental protection. It will produce top quality domed and enamelled items. Can be coloured with the Opaque and Fluorescent Colour Pastes.

ES 8124          This Thixotropic Resin, also known as a ‘Gel’ resin, is developed specifically for applying to curved surfaces. It forms a thick enamel that ‘sticks’ to the surface and does not run off the edges. The Thixotropic Resin is not entirely clear and is best used coloured. It can be thinned by adding ES 8103 resin and can be coloured with the Opaque and Fluorescent Colour Pastes.

ES 8106          This is an extra hard resin which is used when a flat, non-domed, surface is required. It is easy to sand down once fully cured and easier to polish. This resin is not as scratch-resistant as our other resins. Can be coloured with the Opaque and Fluorescent Colour Pastes.

ES 8110          Our Superglaze Resin makes white backgrounds stand out and does not fade. It cannot be used with colour pastes as it ‘bleaches’ out the colour. This resin is often used to coat badges and key fobs.

ES 8115          A Flexible Resin that can be used on fabrics, paper, plastics, etc to be entirely flexible. It can also be used in a mould to create a 3D flexible or soft feeling item. Can be coloured with the Opaque and Fluorescent Colour Pastes.

EZ 7401          Our Volumetric Resin – we have given in to demand and produced this resin for customers that do not want to use scales. In our view volumetric resins are inferior products and can suffer surface defects due to the mixing ratio not being accurate enough. We recommend using a resin that is measured by weight if you are working professionally.

Leave a Reply