By far our most popular product for casting. Scratch and impact resistant with good adhesion. Used by many customers because of the low reject rate due to the high quality of the system. Faithfully reproduces fine detail when casting into a mould.
Normally supplied as a clear system or coloured red or black; other colours are available on request.
Mixing Ratio (wt:wt) 100 parts resin to 50 parts hardener
Pot Life of 100g mix at 20°C: 1 hour
Curing: Overnight at room temperature or 2-3 hours at 40°C. Minimum cure temperature 18°C
Used for potting switches, casting model maker’s parts, infilling engravings, etc.
Supplied in 105g twin-pack units, 1.5kg, 7.5kg, 15kg and 75kg bulk packs