CHEMSET® ES8124 Thixotropic Epoxy Enamelling Resin (Type A)


Our ‘thick’ resin for applying onto curved surfaces.

This resin has been developed with controlled flow properties for enamelling onto surfaces that cannot be placed flat. It has a cloudy appearance but will give a clear coating if thinly applied.

Can be coloured using any of our transparent and opaque colours.

It can also be diluted with our CHEMSET® ES8103 resin to reduce the thickness of the resin to the desired viscosity. This resin is also scratch resistant.

Mixing Ratio: (wt:wt) 100 parts resin to 50 parts hardener

Pot Life of 100g mix at 20°C: 1 hour

Curing: Overnight at room temperature or 3-4 hours at 35°C. Minimum cure temperature of 18°C

Used for enamelling bangles, rings, earrings, etc. that have a curved surface

Supplied in 1kg, 5kg and 25kg cans. Smaller amounts are available from our small order agents.

For further information regarding this product, including pricing or to discuss a particular application requirement please contact us. Get in touch